iKonic Gen. 2 Ceramic

A metal wire is wound around the iKonic ceramic rod which leads to a relatively small contact area between the iKonic ceramic heater and the liquid itself. This creates medium atomizing concentration and uniformity because the main iKonic atomizing element is a metal wire instead of a ceramic rod.

iKonic Gen. 3 Ceramic

A metal wire is built in the inner layer of the iKonic ceramic cylinder leading to a large contact area between the ceramic heater and the liquid, thus resulting in high atomizing uniformity. The iKonic ceramic cylinder requires much time to pre-heat, and the contact area between the metal wire and the liquid is very small. The main iKonic atomizing element is the ceramic rod instead of the metal wire resulting in a long warm-up time and low atomizing concentration.

iKONIC solid rod coil

iKonic Gen. 4 Ceramic

Solid Ceramic Atomizer (coil embedded externally)

iKonic Gen. 5 Ceramic

A metal wire is wound around the iKonic ceramic rod which leads to a relatively small contact area between the iKonic ceramic heater and the liquid itself. This creates medium atomizing concentration and uniformity because the main iKonic atomizing element is a metal wire instead of a ceramic rod.

iKrusher ceramic coil technology

iKonic Gen. 6 Ceramic

Dual Cuboid Ceramic Atomizer (coil embedded internally)

Upcoming iKonic Gen. 7 Ceramic

No material is volatilized from the iKonic ceramic under high temperatures, and the vapor contains no harmful substances.  To achieve the best heat distribution, the iKonic heating element was designed for a variety of coil layouts according to the matrix shape. To offer a more extensive contact area between the liquid and heating material, the iKonic heating circuit adopts the specific printing method. The succession of this series results in richer and more pure vapor taste.

iKonic Advanced Ceramic Technology

iKonic Technology was created specifically for low-power vaporizers. It not only produces the ultimate taste for a variety of oils but also offers the best vaping performance from the initial inhale. We are leading the development in a sustainable method by introducing advanced cellular ceramic material, and metal thick-film printing technology into the vaping industry.