No products in the cart.
Roll over image to zoom in
Click to open expanded view
TUX PRO 510 Cartridges
Revolutionary filling and capping method
The TUX PRO 510 thread cartridge from iKrusher has been engineered with a unique, press and lock, tank/mouthpiece to help minimize the possibilities of leaking after filling. The bottom coil in the TUX PRO is disassociated from the cartridge which allows for a separate, friendlier filling experience. When filling your TUX PRO, the bottom piece is sealed for oil-to-coil preservation. The engineering behind the TUX PRO allows you to fill and cap without the rush while providing fewer leaks once your cartridge is filled. TUX PRO mouthpieces are made from PCTG plastic which ensures that the tanks on our vape cartridges are safe from cracking.
» For bulk OEM orders or wholesale pricing contact us
Frequently Bought Together
- $14.99 – $249.95
- $14.99 – $249.95
iKrushers proprietary iKonic technology ensures that oils receive even surface to coil coverage, maximizing flavor and vapor production, matched with the safest lab tested hardware available. iKrushers iKonic technology is the industry standard.
Our team of experienced in-house designers is available to ensure your oils are complemented by advanced hardware solutions, designed around the needs of your brand with endless design possibilities.
|Tank Capacity:||0.5 ml (half gram) & 1.0 ml (full gram)|
|Mouthpiece Close Method:||Snap on (Press machine required)|
|Mouthpiece Material/ Shape:||Round Medical Grade PCTG Mouthpiece|
|Center Post:||Stainless Steel|
|Tip:||Press and Lock|
|Tank Material:||Medical Grade PA12|
|Coil:||iKonic Ceramic Coil|
- iKonic Ceramic Technology
- Medical grade PCTG Tank
- Stainless Steel center rod post
- Upgraded mouthpiece design to allow for maximum air-flow
- Separate oil and coil technology to prevent leaking during filling
- Press and lock capping design
Frequently Asked Questions
The most common questions can be answered below if you can’t find the the answer you’re looking for please contact us using the button below.
Prices vary depending on design and required quantities, if you’re interested in creating a custom TUX PRO cartridge or complimenting battery for your brand please contact us here
TUX PRO cartridges are intended for one time use and we do not condone alternative methods to refilling a ‘used’ cartridge as this may compromise the integrity of your oils
Filling your Cartridge
The Tux Pro is a press sealed cartridge. To fill use a 12g or 14g blunt nose needle to syringe your concentrate. Place the end of the needle into the bottom of the cartridge. Avoid the middle chimney. Fill your cart slowly assuring no air bubbles occur in the tank.
Capping your Cartridge
The Tux Pro will require a Mouthpiece Press to press and seal.
*Mouthpiece Press not included* Set the 510 into the base of the press and is centered. Place and align provided mouthpiece at the top of the cartridge. Make sure it is centered and lightly press down with your finger to assure there is no movement. Use Mouthpiece Press to press firmly down to assure a firm seal. Once the mouthpiece is on your cartridge is now ready to use.
Tux Pro Filling Instructions
- Available in 1ml
- The needle’s outer diameter must be less than or equal to 1.6mm
- Recommended oil viscosity: mid-high 70-90%
- Use a press machine to seal mouthpiece & bottom coil
- For 50% or below oil viscosity, allow a 1.5 minute fill-to-seal time limit to maintain oil integrity
- For 50% or above oil viscosity, allow a 3 minute fill-to-seal time limit to maintain oil integrity