No products in the cart.
Roll over image to zoom in
Click to open expanded view
Lightweight Upgrade Replacement for LUX Pod System
LUX pods are PCTG (1.0mL) with a black plastic mouthpiece and feature 4 x 2mm intake holes to an iKonic ceramic atomizer (1.3Ω) and magnetic connection to the battery. Customizations for both batteries and pods available on OEM/ODM orders.
*Battery Sold Separately. ( LUX battery )
» For bulk OEM orders or wholesale pricing contact us
Frequently Bought Together
iKrushers proprietary iKonic technology ensures that oils receive even surface to coil coverage, maximizing flavor and vapor production, matched with the safest lab tested hardware available. iKrushers iKonic technology is the industry standard.
Our team of experienced in-house designers is available to ensure your oils are complemented by advanced hardware solutions, designed around the needs of your brand with endless design possibilities.
|Tank Capacity:||1.0ml (1 gram)|
|Coil:||iKonic Ceramic Coil|
|Center Rod Post:||Stainless steel|
- Engineered mouthpiece and tank which utilizes an inverted filling method to minimize leaking
- Mouthpiece gasket which eliminates coil distillate submersion
- iKonic second-generation Cera-Cube technology
- Stainless Steel center rod post
- Customizable options
- Medical grade PCTG Tank
Frequently Asked Questions
The most common questions can be answered below if you can’t find the the answer you’re looking for please contact us using the button below.
LUX Pods are built to be compatible with a variety of oils ranging from a mid-range viscosity to a high viscosity. We recommend not cutting your distillate by more than 20%. LUX pods are not intended to be filled with a low viscosity extract or else leakage may occur.
OEM (Original Equipment Manufacturer) for LUX pods have a MOQ (Minimum Order Quantity) of 5000 pcs. The price varies case by case depending on the complexity of your project. If you’re interested in doing an OEM, custom order, or white label pod, please contact us.
LUX pods are intended for one time use only and we do not condone alternative methods to refilling a ‘used’ pod as this may compromise the integrity of your oils and our hardware.
Yes, we do offer custom packaging but on bulk OEM (Original Equipment Manufacturer) orders only. If you’re interested in doing an OEM please reach out to your nearest iKrusher branch. Our team will offer design assistance and competitive packaging rates for your custom orders.
LUX Pod Filling Instructions
Use a blunt nose syringe to pull your oil into the syringe.
Place the blunt nose syringe tip to the bottom of the pod in either the right or left filling openings.
Inject your oil slowly until the pod is full.
We recommend leaving a very small amount of space. If your oil is pre-measured in either 0.5mL (Half-Gram) or 1.0mL (Full-Gram), please disregard this note
After the oil is filled, push the mouthpiece down until it has snapped into place.
iKrusher’s proprietary pod systems are engineered to provide the lowest leak/failure in the industry.
If your company is mass-producing oils and need specific filling instructions for a commercial filling machine, please contact your equipment manufacturer.
Lux Pod Filling Instructions
- The needle’s outer diameter must be less than or equal 1.8mm
- Recommended oil viscosity: mid-high 70-90%
- Choose one of the 2 bilateral holes to fill, and do NOT fill the two holes simultaneously
- For 50% or below viscosity of oil, Allow a 1.5 minute fill-to-seal time limit to maintain oil integrity
- For 50% or above viscosity of oil, Allow a 3 minute fill-to-seal time limit to maintain oil integrity