VFIRE Pods are PCTG and square 1.0mL and with a black plastic mouthpiece and feature 2 x 1.8 mm intake holes to an iKonic ceramic rod atomizer (1.3Ω). This is iKrusher’s most versatile, and popular product in 2020. Customizations for both batteries and pods available on OEM/ODM orders.
Features
The VFire Pro Pod was developed with anti-leaking technology. Not only does the VFire Pro prevent leaks, but the high-quality iKonic ceramic coil allows for high-temperature vaporization for a long-lasting and heavy hit. The VFire Pro pod is compatible with the VFire Pro Starter Kit and the VFire Pro Battery.
Vape Pod Care
For the best vaporizer pod care, please adhere to the following:
Make sure there is no debris at the base of the pod. This could potentially block the connecting pins and burn the pod quickly.
Do not leave your pod in a hot or cold vehicle for too long, as it can cause consistency issues with your concentrate.
Do not disassemble the pod.
About iKrusher Products
iKrusher vaporizers are the most technically innovative devices on the market. Our goal, when starting this company, was to revolutionize how people vape. We often find that the smallest component can make a big difference. While other vaporizer companies develop products that can do the job, our products are designed to do the job the best way they can. Not only do they do the best job, but they are built to last with minimal care. Take a look at our other products to see why iKrusher believes you should "Vape Different".
Our technology is designed and developed for those who are looking for performance-based vaporizers. They are developed, not only by top-level engineers, but by those who want the best experience out of their vaporizer products. We stand strong in our belief that everyone should be able to experience the best that the vaping industry has to offer, and we are proud to be developing industry-leading technology in order to do so.
Use a blunt nose syringe to pull your oil into the syringe.
Place the blunt nose syringe tip to the bottom of the pod in either the right or left filling openings.
Inject your oil slowly until the pod until it is full.
We recommend leaving a very small amount of space. If your oil is pre-measured in either 0.5mL (Half-Gram) or 1.0mL (Full-Gram), please disregard this note.
After the oil is filled, push the mouthpiece down until it has snapped into place.
iKrusher’s proprietary pod systems are engineered to provide the lowest leak/failure in the industry.
If your company is mass-producing oils and need specific filling instructions for a commercial filling machine, please contact your equipment manufacturer.
We recommend removing the pod and cartridge from the battery when it’s not being used. Place the pod, cartridge, or disposable device in a dry and cool environment. Please do not store your product or recharge it in a vehicle during high temperature ...
Are iKrusher's cartridges screw on or press on?
iKrusher cartridges contain both screw on and press on capping methods, please refer to the list below:
Screw On: Calibr Pro & JC105
Press On: Tux & Tux Pro
*Please note that we recommend using a press machine when ordering quantities larger...
How Do i fill my cartridges or pods?
To fill, use a 12 or 14 gauge blunt nose needle to syringe your oil or concentrate. Place the end of the needle as instructed per the filling instructions. Be sure to avoid the middle chimney, as getting oil in the middle can cause damage to the coil...
Can I use e-liquid?
To put the answer simply - we do not advise using nicotine e-liquid in our devices. The viscosity of the e-liquid can cause leaky carts and pods which could lead to internal damage to the device/battery.
What type of battery is compatible with the TUX PRO?
TUX PRO Cartridges are compatible with any 510 thread battery, we suggest pairing your TUX PRO device with a trusted iKrusher battery (S1 or S2).
What type of pod is compatible with the VFIRE Battery?
VFIRE devices are exclusively compatible with VFIRE pods.
How much does it cost to customize batteries for my brand? (ODM)
The cost of customizing an iKrusher device varies on the specific battery you are interested in; the MOQ (Minimum Order Quantity) varies from each device. In addtion to the MOQ, the price varies case by case depending on the complexity and demand of ...
What types of oils are compatible with iKrusher devices?
Disposable vape devices are built to be compatible with a mid-range viscosity concentration. We recommend not cutting your distillate by more than 40%.
Pod Systems are built to be compatible with a variety of oils ranging from a mid-range viscosity...
How many times can I refill my pods?
This device is a disposable vape and is intended for a one-time use. We do not reccommend alternative methods to refilling a used pod - as this may compromise the integrity of your oils. Once capped, the disposable pod is not meant to be re-opened. Once...
