The TUX is a press sealed cartridge. To fill, use a 12g or 14g blunt nose needle to syringe your concentrate. Place the end of the needle into the bottom of the cartridge. Avoid the middle chimney. Fill your cart slowly, assuring no air bubbles occur in the tank.
Capping your Cartridge
The TUX will require a Mouthpiece Press to press and seal.
* Mouthpiece Press not included* Set the 510 into the base of the press and is centered. Place and align the provided mouthpiece at the top of the cartridge. Make sure it is centered and lightly press down with your finger to assure there is no movement. Use the Mouthpiece Press to press firmly down to assure a firm seal. Once the mouthpiece is on, your cartridge is now ready to use.
We are glad to hear that you are interested in iKrusher devices! You can reach an account manager at (626) 256-3449.
Please have the following information readily available:
Contact Name
Company Name
Shipping Address
Email Address
Phone Number...
How do I buy just one item or one unit?
Your B2B online account is set to order in bulk with a MOQ for most of the products on our website, except the following items can be ordered individually:
These products can be purchased individually by anyone: * Starter Kits * Vaporizers * ...
How do I store my product?
We recommend removing the pod and cartridge from the battery when it’s not being used.
Place the pod, cartridge, or disposable device in a dry and cool environment.
Please do not store your product or recharge it in a vehicle during high temperature...
Are iKrusher's cartridges screw on or press on?
iKrusher cartridges contain both screw on and press on capping methods, please refer to the list below:
Screw On: Calibr Pro & JC105
Press On: Tux & Tux Pro
*Please note that we recommend using a press machine when ordering quantities ...
How Do i fill my cartridges or pods?
To fill, use a 12 or 14 gauge blunt nose needle to syringe your oil or concentrate.
Place the end of the needle as instructed per the filling instructions.
Be sure to avoid the middle chimney, as getting oil in the middle can cause damage to the ...
Can I use e-liquid?
To put the answer simply – we do not advise using nicotine e-liquid in our devices.
The viscosity of the e-liquid can cause leaky carts and pods, which could lead to internal damage to the device/battery.
Do you sell pre-filled pods and cartridges?
No, iKrusher is strictly a vape hardware manufacturer.
With that being said, our pods and cartridges are not prefilled with oil. Clients who buy our products are responsible for filling the pods and cartridges themselves.
Please refer...
What are the heat settings to your products?
In general, it’s the heating element inside the ceramic coil heating up during the vaping process, and the temperature range of the heat normally reaches to 180 C- 250 C/356 F – 482 F.
With that said, the temperature still varies from different oils...
What type of battery is compatible with the TUX PRO?
TUX PRO Cartridges are compatible with any 510 thread battery, we suggest pairing your TUX PRO device with a trusted iKrusher battery (S1 or S2).
How much does it cost to customize batteries for my brand? (ODM)
The cost of customizing an iKrusher device varies on the specific battery you are interested in; the MOQ (Minimum Order Quantity) varies from each device, but most are a MOQ of 5,000 units.
In addition to the MOQ, the price varies case by case depending...
What types of oils are compatible with iKrusher devices?
Disposable vape devices are built to be compatible with a mid-range viscosity concentration. We recommend not cutting your distillate by more than 40%.
Pod Systems are built to be compatible with a variety of oils ranging from a mid-range viscosity...
Do vape batteries come fully charged?
All devices (disposables, vaporizers, 510 batteries, and pod systems) are shipped to our warehouse fully charged.
Due to the uncertainty of storage times after the devices arrive at our warehouses – we recommend to fully charge your rechargeable device...
Do You Offer Custom Branded Packaging?
Yes, we offer custom packaging on bulk ODM (Original Design Manufacturer) orders only.
If you're interested in doing an ODM, custom device, or white label device, please contact us at (626) 256-3449 or at inquiry...